SARS-Cov2-Virus COVID-19 Foaming Test From Urine Sample with a 98% Probability Diagnostics in 15 Seconds

In the fight against Covid-19 the importance of fast, reliable, validated detection cannot be overstated.

Independent of ANY Mutation, the SARS-COVID 19 corona virus quickly proliferates as soon as the virus enters the body. In the meantime, some metabolic and chemical changes begin to occur in the body before clinical symptoms, lung symptoms and PCR test positivity have yet to occur.

In this process, the virus begins to be excreted in the urine. As the burden of the virus increases in the body, both the virus and certain substances in the urine due to metabolic changes begin to be excreted intensively.

The test is conducted in a laboratory using a specially prepared reactant (CEC ) that reacts with the substances found on the surface of the virus and with the substances excreted in the urine and the sample inside the test tube foams the urine.

The rate of foaming varies in direct proportion to the virus load in the body. For people who have any viral load, less foam or more foam will be produced in the test tube, providing a VISUAL volume level indicator.

As a result of laboratory studies conducted on more than 500 patients and more than 1000 healthy individuals diagnosed with COVID-19, the amount of foam was converted into a color scale on the test tube. Validation studies have shown up to 98% correct results (Positive or Negative COVID-19 viral load).

GREEN ZONE

This indicates no viral load in the urine. Favorable clinical picture.

The green zone of the foaming test result of the patients who were ALREADY diagnosed with Covid-19 positive and HAVE ALREADY started to be treated, is interpreted as showing that the treatment process was successful and the virus load in the patient body has disappeared.

YELLOW ZONE

YELLOW ZONE - A small amount of virus load appears to be in the urine

and / or substances that should not be present in the urine. This is a suspicious clinical picture, the individual tested is requiring follow-up at a health institution (he/she may be a Spreader).

RED ZONE

Heavy viral load present in the urine

and / or urine contains substances that should not be present. This is indicates a severe clinical picture. This individual needs to apply to a health institution immediately (he/she is a SPREADER).

ORANGE ZONE

Increased viral load in urine

and / or substances that should not be in the present in the urine, showing an adverse clinical picture. This individual needs to apply to a health institution as soon as possible (he/she may be a Spreader).

1. Take a Urine sample.

2. Fill in the test tube with Urine Sample until the black line (the Vacutainer will fill up by itself to the correct level if it was Vacuum prepared).

3. Shake the tube for 15 seconds

Then, turn the test tube upside down and put it on a smooth surface. See the foam level in the Test tube. Also, please note that you should move the test tube slightly to the left and right, so that any foam remaining at the top of the tube falls to the liquid surface. Once the result is clear, we suggest that you take a Photo of the Test Tube clearly showing the Foam Level (immediately once the result is visibly stable) for further Time and Location Referrence.

MAJOR ADVANTAGE: Anyone and anywhere can do all the stages of the test under hygienic conditions. ONLY such test to show VIRAL LOAD and STATUS without any Instrumentation. Depending on your location and Test Result, we suggest conserve or dispose of the Samples in a Safe Manner. ALWAYS Follow local Health Department regulations. NOTE: The 98% Probability Diagnostics is the result of Validation testing, available to Customers and Research Organisations. Here is the FULL PROCEDURE:

Our ORSAIR PhoenixDX 2019-NCOV is a real-time RT-PCR-based detection system for the 2019 Wuhan coronavirus (2019-nCoV). 2019-nCoV is considered a novel human coronavirus that is genetically distinct from the common human coronaviruses (229E, NL63, OC43, HKU1), which cause seasonal acute respiratory illness. It is also genetically distinct from the two newer human coronaviruses, MERS-CoV and SARS-CoV.

Our Test Kit (50 tests) ORSAIR PhoenixDX 2019-NCOV detects the presence of 3 different and highly specific gene sequences of 2019-nCoV: E gene, N gene and RdRP gene. All 3 assays must be tested positive to confirm the sample as 2019-nCoV-positive.

Additionally, a non-infectious positive control and a negative human extraction control are included. The positive control is used to confirm functionality of the assays and overall PCR performance, the negative human extraction control is included to evaluate the quality of the RNA isolation independently from the 2019-nCoV assays.

The first step in the detection of 2019-nCoV is the conversion of viral RNA into cDNA. Afterwards, the target sequences unique for 2019-nCoV are specifically amplified with amplification monitored in real time through the use of fluorescently labelled probes: upon incorporation into the newly amplified DNA strands, the fluorophore (FAMTM) is released and an increase in fluorescence signal can be observed. Due to the intrinsic mutation rate of coronaviruses, it is possible that mutations in the target sequence occur and accumulate over time. This can lead to false-negative results with a PCR- based detection approach.

ORSAIR PhoenixDX 2019-NCOV addresses this issue by using 3 detection assays on 3 different target sequences to minimize the chance of false-negative results caused by an altered target sequence. If samples are tested negative in one or more assays, additional complementary testing may be required. The original target sequences for 2019-nCoV are included as a non-infectious target positive control (TPC) to check the integrity of the detection assays.

Samples tested positive should always be confirmed through complementary methods and additional analysis in an independent laboratory.

prada replacement strap prada blue cologne prada bag cleo sabrina designs cardinal building materials st louis prada ala moana vinyl building materials original prada bags gucci bag outlet usa alfonso prada yellow prada purse gucci sklep online prada snow jacket instagram followers private prada waikiki prada design firehouse subs fowler גוצי lyrics light up light up fake prada bags shop gucci online outlet usa online pantone reflex blue cmyk prada brown boot tri state printing prada mens scarf prada patent loafer chatgpt cto financial chatgpt the mosaic company tampa fl chatgpt interface mens prada necklace who own chatgpt brand outlet online prada amande chatgpt key prada designer bags chatgpt prompts github iko nordic cornerstone prada reedition 2005 analyze followers instagram prada panier bag prada promo code birkenstock outlet store prada luna carbon captains gear instagram followers stuck corkboard sheet devil loves prada chatgpt parameters designer sunglass outlet premium followers instagram prada dog carrier ysl handbags outlet instagram followers cleaner prada blue glasses prada gabardine sneakers night of the puffings birkenstocks outlet prada cloudbust outfit prada home chatgpt watermark instagram ranking followers new instagram followers bunker hill park original prada bags prada multipochette food in rosemont prada cat collar 600 followers instagram 20k followers instagram chatgpt 调教 chatgpt? chatgpt free online prada vinyl bag prada vogue prada panties rosemont lunch night of the puffings like followers instagram jack spade darrow brief beyond the door 1974 full movie valentine tx prada williams chicken franchise cost online clothing outlet stores prada white can you use eyelash glue for fake mustache prada hoodie women's gucci clothing line prada loafers used printing concepts prada pattina bag prada loafter fluffy prada bag bruce mcmillan thailand gucci america inc sana prada sailing captains hat prada sunglasse gucci deutschland gucci america inc ai bot chatgpt

3.3) SPECIMENS - HANDLING AND STORAGE

Specimens can be stored at 4°C for up to 72 hours after collection.

If a delay in extraction is expected, store specimens at -70°C or lower. Extracted nucleic acids should be stored at -70°C or lower. Do not use specimens if: they were not kept at 2-4°C (≤ 4 days) or frozen at -70°C or below. they are insufficiently labelled or lack documentation. they are not suitable for this purpose (see above for suitable sample material). the specimen volume is insufficient.

3.4) SAMPLE PREPARATION / NUCLEIC ACID EXTRACTION

The performance of RT-PCR assays strongly depends on the amount and quality of sample template RNA. It is strongly recommended to qualify and validate RNA extraction procedures for recovery and purity before testing specimens.

Suitable nucleic acid extraction systems successfully used in combination with ORSAIR PhoenixDX DETECTION KITS include: bioMérieux NucliSens® systems, QIAamp® Viral RNA Mini Kit, QIAamp® MinElute Virus Spin Kit or RNeasy® Mini Kit (QIAGEN), EZ1 DSP Virus Kit (QIAGEN), Roche MagNA Pure Compact RNA Isolation Kit, Roche MagNA Pure Compact Nucleic Acid Isolation Kit, and Roche MagNA Pure 96 DNA and Viral NA Small Volume Kit, and Invitrogen ChargeSwitch® Total RNA Cell Kit. Store and keep residual specimens and extracted nucleic acids at -70°C.

Only thaw the number of specimen extracts that will be tested in a single day. Do not freeze/thaw extracts more than once before testing as each freeze/thaw cycle will decrease the RNA quality. It may be possible to use patient samples directly, depending on the sample type. However, this may require a prior lysis step and titration of the amount on sample that can be used without inhibiting the reaction. This procedure has not been validated, use of isolated RNA is recommended.

Please email for more information and a ask QUOTE = always indicate if you are a End-User or not and WHICH MODEL of PCR are your using?

Mr.Theo BASCH, theo.orsys@gmail.com